- Processing Talk
- Compare
- LM2 Pro S2 5.5W vs S9 5.5W
Ortur LM2 Pro S2 5.5W vs Sculpfun S9 5.5W
What LM2 Pro S2 5.5W does better (1) and where S9 5.5W wins (4) — every spec side by side.
vs
4.2Power & cutting4.7
7.7Work area8.7
7.1Safety3.2
4.6Features & ease of use4.6
Why is LM2 Pro S2 5.5W better than S9 5.5W?
- Flame / fire detectionYes · S9 5.5W: No
Why is S9 5.5W better than LM2 Pro S2 5.5W?
- Work area (surface)1,600 cm² vs 1,702 cm²+6%
- Max cutting depth – wood / plywood (one pass)12 mm vs 15 mm+25%
- Work area depth (Y)400 mm vs 415 mm+4%
- Work area width (X)400 mm vs 410 mm+2%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 450 nm |
| Laser power | ||
| Laser output power | 5.5 W | 5.5 W |
| Work area | ||
| Work area | 400 × 400 mm | 410 × 415 mm |
| Work area width (X) | 400 mm | 410 mm |
| Work area depth (Y) | 400 mm | 415 mm |
| Work area (surface) | 1,600 cm² | 1,702 cm² |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 250 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | 12 mm | 15 mm |
| Max cutting depth – acrylic | 5 mm | — |
| Precision | ||
| Positioning accuracy | — | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | No |
| Emergency stop button | Yes | — |
| Tilt / movement sensor | Yes | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB | USB |
| Wi-Fi | No | No |
| USB | Yes | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 600 mm | — |
| Depth | 570 mm | — |
| Height | 130 mm | — |
| Weight | — | 3 kg |
