- Processing Talk
- Compare
- H10 10W vs K8 Mini 10W
Ortur H10 10W vs Wainlux K8 Mini 10W
What H10 10W does better (5) and where K8 Mini 10W wins (2) — every spec side by side.
vs
6.2Power & cutting4.8
7.0Precision6.2
7.7Work area2.9
6.2Safety9.6
4.8Features & ease of use5.2
Why is H10 10W better than K8 Mini 10W?
- Work area (surface)1,600 cm² vs 169 cm²9.5×
- Max cutting depth – wood / plywood (one pass)12 mm vs 8 mm+50%
- Air assistYes · K8 Mini 10W: No
- Work area width (X)400 mm vs 130 mm3.1×
- Work area depth (Y)400 mm vs 130 mm3.1×
Why is K8 Mini 10W better than H10 10W?
- Enclosed (fully covered)No · H10 10W: Yes
- Built-in cameraNo · H10 10W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 450 nm | — |
| Laser power | ||
| Laser output power | 10 W | 10 W |
| Work area | ||
| Work area | 400 × 400 mm | 130 × 130 mm |
| Work area width (X) | 400 mm | 130 mm |
| Work area depth (Y) | 400 mm | 130 mm |
| Work area (surface) | 1,600 cm² | 169 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 333 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | 12 mm | 8 mm |
| Max cutting depth – acrylic | 8 mm | — |
| Precision | ||
| Laser spot size | 0.08 mm | 0.08 mm |
| Positioning accuracy | 0.01 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Flame / fire detection | No | No |
| Emergency stop button | Yes | — |
| Tilt / movement sensor | Yes | — |
| Built-in fume filter / purifier | Yes | — |
| Exhaust fan | — | Yes |
| Laser shield / filter cover | Yes | — |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | Yes |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | — |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB | — |
| Wi-Fi | No | — |
| USB | Yes | — |
| Phone app control | Yes | Yes |
| Compatible software | LightBurn, LaserGRBL | — |
| LightBurn compatible | Yes | — |
