- Processing Talk
- Compare
- Reno45 45W vs Pronto U1 105W
Monport Reno45 45W vs OMTech Pronto U1 105W
What Reno45 45W does better (2) and where Pronto U1 105W wins (5) — every spec side by side.
vs
2.9Power & cutting8.5
3.4Speed8.8
5.9Work area8.3
4.8Safety4.8
7.0Features & ease of use4.2
Dimensions
Size comparison
Reno45 45WPronto U1 105W
| Reno45 45W | Pronto U1 105W | Difference | |
|---|---|---|---|
| Height | 285 mm | 1,021 mm | −736 mm |
| Width | 800 mm | 1,501 mm | −701 mm |
| Depth | 575 mm | 1,120 mm | −545 mm |
| Weight | 30.4 kg | 255 kg | −224.6 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Reno45 45W better than Pronto U1 105W?
- Autofocus / auto heightYes · Pronto U1 105W: No
- Weight30.4 kg vs 255 kg8.4×
Why is Pronto U1 105W better than Reno45 45W?
- Laser output power45 W vs 105 W2.3×
- Work area (surface)2,531 cm² vs 5,385 cm²2.1×
- Max engraving / travel speed500 mm/s vs 1,200 mm/s2.4×
- Work area depth (Y)356 mm vs 599 mm+68%
- Work area width (X)711 mm vs 899 mm+26%
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 10,600 nm | — |
| Laser power | ||
| Laser output power | 45 W | 105 W |
| Work area | ||
| Work area | 711 × 356 mm | 899 × 599 mm |
| Work area width (X) | 711 mm | 899 mm |
| Work area depth (Y) | 356 mm | 599 mm |
| Work area (surface) | 2,531 cm² | 5,385 cm² |
| Pass-through slot | Yes | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 500 mm/s | 1,200 mm/s |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | No |
| Touchscreen / control panel | Yes | — |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | USB, Wi-Fi, Ethernet |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Ethernet (LAN) | — | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, RDWorks |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 800 mm | 1,501 mm |
| Depth | 575 mm | 1,120 mm |
| Height | 285 mm | 1,021 mm |
| Weight | 30.4 kg | 255 kg |
| Rated power consumption | 45 W | — |
| Input voltage | — | 110–120 V |
