- Processing Talk
- Compare
- Reno 65W vs P2S 55W
Monport Reno 65W vs xTool P2S 55W
What Reno 65W does better (6) and where P2S 55W wins (2) — every spec side by side.
Dimensions
Size comparison
Reno 65WP2S 55W
| Reno 65W | P2S 55W | Difference | |
|---|---|---|---|
| Height | 285 mm | 268 mm | +17 mm |
| Width | 800 mm | 1,000 mm | −200 mm |
| Depth | 575 mm | 639 mm | −64 mm |
| Weight | 30.4 kg | 45 kg | −14.6 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Reno 65W better than P2S 55W?
- Work area (surface)2,531 cm² vs 1,848 cm²+37%
- Autofocus / auto heightYes · P2S 55W: No
- Laser output power65 W vs 55 W+18%
- Weight30.4 kg vs 45 kg+48%
- Work area width (X)711 mm vs 600 mm+19%
- Work area depth (Y)356 mm vs 308 mm+16%
Why is P2S 55W better than Reno 65W?
- Built-in cameraNo · Reno 65W: Yes
- Max engraving / travel speed500 mm/s vs 600 mm/s+20%
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 10,600 nm | — |
| Laser power | ||
| Laser output power | 65 W | 55 W |
| Work area | ||
| Work area | 711 × 356 mm | 600 × 308 mm |
| Work area width (X) | 711 mm | 600 mm |
| Work area depth (Y) | 356 mm | 308 mm |
| Work area (surface) | 2,531 cm² | 1,848 cm² |
| Max workpiece height | — | 71 mm |
| Pass-through slot | Yes | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 500 mm/s | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 18 mm |
| Max cutting depth – acrylic | — | 20 mm |
| Precision | ||
| Laser spot size | — | 0.2 mm |
| Positioning accuracy | — | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Flame / fire detection | — | Yes |
| Emergency stop button | — | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | Yes |
| Autofocus / auto height | Yes | No |
| Touchscreen / control panel | Yes | — |
| Offline engraving (no computer) | — | Yes |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | Wi-Fi |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Ethernet (LAN) | — | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, xTool Creative Space |
| LightBurn compatible | Yes | Yes |
| File formats | — | SVG, DXF, PNG, JPG, BMP |
| Size & power | ||
| Width | 800 mm | 1,000 mm |
| Depth | 575 mm | 639 mm |
| Height | 285 mm | 268 mm |
| Weight | 30.4 kg | 45 kg |
| Rated power consumption | 45 W | — |
