- Processing Talk
- Compare
- Reno 65W vs Polar S 55W
Monport Reno 65W vs OMTech Polar S 55W
What Reno 65W does better (6) and where Polar S 55W wins (2) — every spec side by side.
vs
5.9Power & cutting3.8
3.4Speed7.8
5.9Work area4.2
4.8Safety8.6
7.0Features & ease of use8.8
Dimensions
Size comparison
Reno 65WPolar S 55W
| Reno 65W | Polar S 55W | Difference | |
|---|---|---|---|
| Height | 285 mm | 356 mm | −71 mm |
| Width | 800 mm | 1,087 mm | −287 mm |
| Depth | 575 mm | 607 mm | −32 mm |
| Weight | 30.4 kg | 75 kg | −44.6 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Reno 65W better than Polar S 55W?
- Work area (surface)2,531 cm² vs 1,830 cm²+38%
- Laser output power65 W vs 55 W+18%
- Weight30.4 kg vs 75 kg2.5×
- Pass-through slotYes · Polar S 55W: No
- Work area width (X)711 mm vs 600 mm+19%
- Work area depth (Y)356 mm vs 305 mm+17%
Why is Polar S 55W better than Reno 65W?
- Max engraving / travel speed500 mm/s vs 1,000 mm/s2×
- Built-in cameraNo · Reno 65W: Yes
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 10,600 nm | — |
| Laser power | ||
| Laser output power | 65 W | 55 W |
| Work area | ||
| Work area | 711 × 356 mm | 600 × 305 mm |
| Work area width (X) | 711 mm | 600 mm |
| Work area depth (Y) | 356 mm | 305 mm |
| Work area (surface) | 2,531 cm² | 1,830 cm² |
| Pass-through slot | Yes | No |
| Speed & cutting | ||
| Max engraving / travel speed | 500 mm/s | 1,000 mm/s |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Flame / fire detection | — | Yes |
| Emergency stop button | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | Yes |
| Autofocus / auto height | Yes | Yes |
| Touchscreen / control panel | Yes | — |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | USB, Wi-Fi, Ethernet, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Ethernet (LAN) | — | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, RDWorks |
| LightBurn compatible | Yes | Yes |
| Controller / firmware | — | Ruida |
| Size & power | ||
| Width | 800 mm | 1,087 mm |
| Depth | 575 mm | 607 mm |
| Height | 285 mm | 356 mm |
| Weight | 30.4 kg | 75 kg |
| Rated power consumption | 45 W | — |
| Input voltage | — | 110–120 V |
