- Processing Talk
- Compare
- Reno 45W vs K40 45W
Monport Reno 45W vs OMTech K40 45W
What Reno 45W does better (7) and where K40 45W wins (0) — every spec side by side.
Dimensions
Size comparison
Reno 45WK40 45W
| Reno 45W | K40 45W | Difference | |
|---|---|---|---|
| Height | 285 mm | 249 mm | +36 mm |
| Width | 800 mm | 810 mm | −10 mm |
| Depth | 575 mm | 500 mm | +75 mm |
| Weight | 30.4 kg | 30 kg | +0.4 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Reno 45W better than K40 45W?
- Work area (surface)2,531 cm² vs 600 cm²4.2×
- Max engraving / travel speed500 mm/s vs 300 mm/s+67%
- Autofocus / auto heightYes · K40 45W: No
- Work area width (X)711 mm vs 200 mm3.6×
- Pass-through slotYes · K40 45W: No
- Wi-FiYes · K40 45W: No
- Work area depth (Y)356 mm vs 300 mm+19%
Why is K40 45W better than Reno 45W?
K40 45W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 10,600 nm | — |
| Laser power | ||
| Laser output power | 45 W | 45 W |
| Work area | ||
| Work area | 711 × 356 mm | 200 × 300 mm |
| Work area width (X) | 711 mm | 200 mm |
| Work area depth (Y) | 356 mm | 300 mm |
| Work area (surface) | 2,531 cm² | 600 cm² |
| Pass-through slot | Yes | No |
| Speed & cutting | ||
| Max engraving / travel speed | 500 mm/s | 300 mm/s |
| Precision | ||
| Positioning accuracy | — | 0.02 mm |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Emergency stop button | — | Yes |
| Built-in fume filter / purifier | — | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | No |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | — |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LaserGRBL |
| LightBurn compatible | Yes | — |
| File formats | — | AI, BMP, DXF, GIF |
| Size & power | ||
| Width | 800 mm | 810 mm |
| Depth | 575 mm | 500 mm |
| Height | 285 mm | 249 mm |
| Weight | 30.4 kg | 30 kg |
| Rated power consumption | 45 W | 45 W |
