- Processing Talk
- Compare
- Cloud Pro II 50W vs Reno 45W
Gweike Cloud Pro II 50W vs Monport Reno 45W
What Cloud Pro II 50W does better (4) and where Reno 45W wins (5) — every spec side by side.
vs
3.4Power & cutting3.0
5.8Speed3.5
4.0Work area6.2
4.7Safety4.7
8.0Features & ease of use7.1
Dimensions
Size comparison
Cloud Pro II 50WReno 45W
| Cloud Pro II 50W | Reno 45W | Difference | |
|---|---|---|---|
| Height | 360 mm | 285 mm | +75 mm |
| Width | 1,140 mm | 800 mm | +340 mm |
| Depth | 730 mm | 575 mm | +155 mm |
| Weight | 17 kg | 30.4 kg | −13.4 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Cloud Pro II 50W better than Reno 45W?
- Built-in cameraYes · Reno 45W: No
- Laser output power50 W vs 45 W+11%
- Max engraving / travel speed600 mm/s vs 500 mm/s+20%
- Weight17 kg vs 30.4 kg+79%
Why is Reno 45W better than Cloud Pro II 50W?
- Work area (surface)1,530 cm² vs 2,531 cm²+65%
- Pass-through slotNo · Cloud Pro II 50W: Yes
- Wi-FiNo · Cloud Pro II 50W: Yes
- Work area width (X)510 mm vs 711 mm+39%
- Work area depth (Y)300 mm vs 356 mm+19%
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 10,600 nm |
| Laser power | ||
| Laser output power | 50 W | 45 W |
| Work area | ||
| Work area | 510 × 300 mm | 711 × 356 mm |
| Work area width (X) | 510 mm | 711 mm |
| Work area depth (Y) | 300 mm | 356 mm |
| Work area (surface) | 1,530 cm² | 2,531 cm² |
| Pass-through slot | No | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 500 mm/s |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Emergency stop button | Yes | — |
| Exhaust fan | Yes | — |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | — | Yes |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | No | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, Glowforge App | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 1,140 mm | 800 mm |
| Depth | 730 mm | 575 mm |
| Height | 360 mm | 285 mm |
| Weight | 17 kg | 30.4 kg |
| Rated power consumption | — | 45 W |
