- Processing Talk
- Compare
- Ray7 7.5W vs S30 5W
Longer Ray7 7.5W vs Sculpfun S30 5W
What Ray7 7.5W does better (2) and where S30 5W wins (4) — every spec side by side.
Why is Ray7 7.5W better than S30 5W?
- Laser output power7.5 W vs 5 W+50%
- Flame / fire detectionYes · S30 5W: No
Why is S30 5W better than Ray7 7.5W?
- Work area (surface)946 cm² vs 1,463 cm²+55%
- Positioning accuracy0.06 mm vs 0.005 mm12×
- Work area width (X)305 mm vs 380 mm+25%
- Work area depth (Y)310 mm vs 385 mm+24%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 7.5 W | 5 W |
| Work area | ||
| Work area | 305 × 310 mm | 380 × 385 mm |
| Work area width (X) | 305 mm | 380 mm |
| Work area depth (Y) | 310 mm | 385 mm |
| Work area (surface) | 946 cm² | 1,463 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | — |
| Precision | ||
| Laser spot size | 0.06 mm | 0.06 mm |
| Positioning accuracy | 0.06 mm | 0.005 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | No |
| Emergency stop button | Yes | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | — | Yes |
| Offline engraving (no computer) | Yes | Yes |
| Connectivity & software | ||
| Connections | Wi-Fi | USB, Wi-Fi, Bluetooth, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | — | Yes |
| Bluetooth | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | — | LightBurn, LaserGRBL |
| LightBurn compatible | — | Yes |
| Size & power | ||
| Rated power consumption | — | 60 W |
