- Processing Talk
- Compare
- B1 40W vs H10 20W
Longer B1 40W vs Ortur H10 20W
What B1 40W does better (6) and where H10 20W wins (2) — every spec side by side.
Why is B1 40W better than H10 20W?
- Laser output power40 W vs 20 W2×
- Max cutting depth – wood / plywood (one pass)25 mm vs 12 mm2.1×
- Max engraving / travel speed600 mm/s vs 333 mm/s+80%
- Work area (surface)1,980 cm² vs 1,600 cm²+24%
- Work area width (X)450 mm vs 400 mm+12%
- Work area depth (Y)440 mm vs 400 mm+10%
Why is H10 20W better than B1 40W?
- Air assistNo · B1 40W: Yes
- Laser spot size0.1 mm vs 0.08 mm+25%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 450 nm |
| Laser power | ||
| Laser output power | 40 W | 20 W |
| Work area | ||
| Work area | 450 × 440 mm | 400 × 400 mm |
| Work area width (X) | 450 mm | 400 mm |
| Work area depth (Y) | 440 mm | 400 mm |
| Work area (surface) | 1,980 cm² | 1,600 cm² |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 333 mm/s |
| Max cutting depth – wood / plywood (one pass) | 25 mm | 12 mm |
| Max cutting depth – acrylic | — | 8 mm |
| Precision | ||
| Laser spot size | 0.1 mm | 0.08 mm |
| Positioning accuracy | — | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Built-in fume filter / purifier | — | Yes |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | — |
| Connectivity & software | ||
| Connections | USB, SD / USB drive | USB |
| Wi-Fi | No | No |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Phone app control | Yes | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
