- Processing Talk
- Compare
- K70 Max vs H20 40W
Ikier K70 Max vs Ortur H20 40W
What K70 Max does better (6) and where H20 40W wins (3) — every spec side by side.
Why is K70 Max better than H20 40W?
- Work area (surface)6,800 cm² vs 1,260 cm²5.4×
- Laser output power77 W vs 40 W+92%
- Max engraving / travel speed600 mm/s vs 333 mm/s+80%
- Work area depth (Y)800 mm vs 300 mm2.7×
- Work area width (X)850 mm vs 420 mm2×
- Flame / fire detectionYes · H20 40W: No
Why is H20 40W better than K70 Max?
- Enclosed (fully covered)No · K70 Max: Yes
- Built-in cameraNo · K70 Max: Yes
- Two laser sourcesNo · K70 Max: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm), Infrared diode (1064 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | Yes |
| Wavelength | 455 nm | 1,064 nm |
| Frame material | Steel | Aluminium |
| Laser power | ||
| Laser output power | 77 W | 40 W |
| Second laser output power | — | 2 W |
| Work area | ||
| Work area | 850 × 800 mm | 420 × 300 mm |
| Work area width (X) | 850 mm | 420 mm |
| Work area depth (Y) | 800 mm | 300 mm |
| Work area (surface) | 6,800 cm² | 1,260 cm² |
| Max workpiece height | — | 98 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 333 mm/s |
| Max cutting depth – acrylic | 25 mm | — |
| Precision | ||
| Laser spot size | 0.2 mm | — |
| Positioning accuracy | 0.01 mm | — |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Laser safety class | — | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | Yes | No |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Exhaust fan | — | Yes |
| Laser shield / filter cover | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | Yes |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | — |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | Yes | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | PNG, JPG, BMP, GIF, DXF, SVG | — |
| Size & power | ||
| Rated power consumption | 360 W | — |
| Input voltage | 100–240 V | — |
