- Processing Talk
- Compare
- K2 Pro 55W vs K40 Max 48W
Ikier K2 Pro 55W vs Ikier K40 Max 48W
What K2 Pro 55W does better (2) and where K40 Max 48W wins (3) — every spec side by side.
vs
9.5Power & cutting8.7
8.0Speed8.0
4.4Precision5.5
7.4Work area9.7
8.7Safety6.4
8.9Features & ease of use8.9
Why is K2 Pro 55W better than K40 Max 48W?
- Enclosed (fully covered)Yes · K40 Max 48W: No
- Laser output power55 W vs 48 W+15%
Why is K40 Max 48W better than K2 Pro 55W?
- Work area (surface)1,600 cm² vs 6,800 cm²4.2×
- Work area depth (Y)320 mm vs 800 mm2.5×
- Work area width (X)500 mm vs 850 mm+70%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Frame material | — | Steel |
| Laser power | ||
| Laser output power | 55 W | 48 W |
| Work area | ||
| Work area | 500 × 320 mm | 850 × 800 mm |
| Work area width (X) | 500 mm | 850 mm |
| Work area depth (Y) | 320 mm | 800 mm |
| Work area (surface) | 1,600 cm² | 6,800 cm² |
| Conveyor / roll feeder support | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 20 mm |
| Precision | ||
| Laser spot size | 0.1 mm | 0.1 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Flame / fire detection | Yes | Yes |
| Tilt / movement sensor | Yes | — |
| Lid interlock | Yes | — |
| Exhaust fan | Yes | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, AtomStack Studio | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | — | PNG, JPG, BMP, GIF, DXF, SVG |
| Size & power | ||
| Width | 750 mm | — |
| Depth | 600 mm | — |
| Height | 261 mm | — |
| Weight | 23.6 kg | — |
| Rated power consumption | — | 220 W |
| Input voltage | — | 100–240 V |
