- Processing Talk
- Compare
- K1 12W vs S9 5.5W
Ikier K1 12W vs Sculpfun S9 5.5W
What K1 12W does better (4) and where S9 5.5W wins (1) — every spec side by side.
Why is K1 12W better than S9 5.5W?
- Laser output power12 W vs 5.5 W2.2×
- Autofocus / auto heightYes · S9 5.5W: No
- Flame / fire detectionYes · S9 5.5W: No
- Wi-FiYes · S9 5.5W: No
Why is S9 5.5W better than K1 12W?
- Weight12 kg vs 3 kg4×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | 450 nm |
| Laser power | ||
| Laser output power | 12 W | 5.5 W |
| Work area | ||
| Work area | 410 × 410 mm | 410 × 415 mm |
| Work area width (X) | 410 mm | 410 mm |
| Work area depth (Y) | 410 mm | 415 mm |
| Work area (surface) | 1,681 cm² | 1,702 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 800 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 15 mm |
| Precision | ||
| Laser spot size | 0.06 mm | — |
| Positioning accuracy | 0.01 mm | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | No |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | No |
| Rotary attachment support | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | SVG, DXF, JPG, PNG, BMP, TIF | — |
| Size & power | ||
| Width | 650 mm | — |
| Depth | 750 mm | — |
| Height | 222 mm | — |
| Weight | 12 kg | 3 kg |
| Input voltage | 100–240 V | — |
