- Processing Talk
- Compare
- G3 20W vs Autoforge XPro 30W
Gweike G3 20W vs Monport Autoforge XPro 30W
What G3 20W does better (2) and where Autoforge XPro 30W wins (5) — every spec side by side.
vs
4.8Power & cutting4.0
8.6Speed9.7
5.7Precision5.3
6.6Work area9.2
9.4Safety7.3
9.1Features & ease of use8.6
Dimensions
Size comparison
G3 20WAutoforge XPro 30W
| G3 20W | Autoforge XPro 30W | Difference | |
|---|---|---|---|
| Height | 330 mm | 550 mm | −220 mm |
| Width | 526 mm | 350 mm | +176 mm |
| Depth | 220 mm | 400 mm | −180 mm |
| Weight | 12.2 kg | 18 kg | −5.8 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is G3 20W better than Autoforge XPro 30W?
- Enclosed (fully covered)Yes · Autoforge XPro 30W: No
- Weight12.2 kg vs 18 kg+48%
Why is Autoforge XPro 30W better than G3 20W?
- Work area (surface)289 cm² vs 645 cm²2.2×
- Max engraving / travel speed15,000 mm/s vs 30,000 mm/s2×
- Laser output power20 W vs 30 W+50%
- Work area width (X)170 mm vs 254 mm+49%
- Work area depth (Y)170 mm vs 254 mm+49%
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm), Blue diode (≈455 nm) | Fibre (1064 nm), Blue diode (≈455 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | Yes | Yes |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | 20 W | 30 W |
| Work area | ||
| Work area | 170 × 170 mm | 254 × 254 mm |
| Work area width (X) | 170 mm | 254 mm |
| Work area depth (Y) | 170 mm | 254 mm |
| Work area (surface) | 289 cm² | 645 cm² |
| Conveyor / roll feeder support | Yes | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 15,000 mm/s | 30,000 mm/s |
| Max cutting depth – wood / plywood (one pass) | 23 mm | — |
| Max cutting depth – acrylic | 20 mm | — |
| Precision | ||
| Laser spot size | 0.1 mm | 0.1 mm |
| Positioning accuracy | 0.003 mm | — |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Lid interlock | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | Yes | Yes |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 526 mm | 350 mm |
| Depth | 220 mm | 400 mm |
| Height | 330 mm | 550 mm |
| Weight | 12.2 kg | 18 kg |
| Input voltage | 110–240 V | — |
