- Processing Talk
- Compare
- Z5-1 vs G3 MOPA 60W
Genmitsu Z5-1 vs Gweike G3 MOPA 60W
What Z5-1 does better (0) and where G3 MOPA 60W wins (2) — every spec side by side.
vs
4.9Speed8.6
Why is Z5-1 better than G3 MOPA 60W?
Z5-1 has no measurable advantages in this pair.
Why is G3 MOPA 60W better than Z5-1?
- Max engraving / travel speed10,000 mm/s vs 15,000 mm/s+50%
- Two laser sourcesNo · Z5-1: Yes
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm), Blue diode (≈455 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | Yes |
| MOPA fibre source (adjustable pulse) | — | Yes |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | — | 60 W |
| Work area | ||
| Work area | — | 170 × 170 mm |
| Work area width (X) | — | 170 mm |
| Work area depth (Y) | — | 170 mm |
| Work area (surface) | — | 289 cm² |
| Conveyor / roll feeder support | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | 15,000 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 23 mm |
| Max cutting depth – acrylic | — | 20 mm |
| Precision | ||
| Laser spot size | — | 0.1 mm |
| Positioning accuracy | — | 0.003 mm |
| Safety | ||
| Enclosed (fully covered) | — | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Autofocus / auto height | — | Yes |
| Rotary attachment support | — | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | — | 526 mm |
| Depth | — | 220 mm |
| Height | — | 330 mm |
| Weight | — | 12.2 kg |
| Input voltage | — | 110–240 V |
