- Processing Talk
- Compare
- PROVerXL 4030S vs TTC-H40
Genmitsu PROVerXL 4030S vs Two Trees TTC-H40
What PROVerXL 4030S does better (4) and where TTC-H40 wins (4) — every spec side by side.
vs
8.4Power & cutting9.7
7.0Speed3.0
7.5Precision6.4
6.7Work area8.6
6.5Safety6.5
8.0Features & ease of use5.7
Dimensions
Size comparison
PROVerXL 4030STTC-H40
| PROVerXL 4030S | TTC-H40 | Difference | |
|---|---|---|---|
| Height | 590 mm | 404 mm | +186 mm |
| Width | 693 mm | 1,292 mm | −599 mm |
| Depth | 658 mm | 1,290 mm | −632 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is PROVerXL 4030S better than TTC-H40?
- Max engraving / travel speed83 mm/s vs 30 mm/s2.8×
- Closed-loop motors / servosYes · TTC-H40: No
- Tool length / Z probeYes · TTC-H40: No
- Z travel120 mm vs 100 mm+20%
Why is TTC-H40 better than PROVerXL 4030S?
- Work area (surface)1,200 cm² vs 10,000 cm²8.3×
- Spindle power710 W vs 3,000 W4.2×
- Work area width (X)400 mm vs 1,000 mm2.5×
- Work area depth (Y)300 mm vs 1,000 mm3.3×
Specifications
Side by side
| General | ||
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Frame material | — | Aluminium |
| Work area | ||
| Work area | 400 × 300 mm | 1000 × 1000 mm |
| Work area width (X) | 400 mm | 1,000 mm |
| Work area depth (Y) | 300 mm | 1,000 mm |
| Work area (surface) | 1,200 cm² | 10,000 cm² |
| Z travel | 120 mm | 100 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 83 mm/s | 30 mm/s |
| Precision | ||
| Positioning accuracy | 0.05 mm | 0.05 mm |
| Closed-loop motors / servos | Yes | No |
| Linear rails | Yes | Yes |
| Ball screws | Yes | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Emergency stop button | Yes | Yes |
| Features | ||
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Laser module option (CNC) | Yes | Yes |
| Automatic tool changer | No | No |
| Tool length / Z probe | Yes | No |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Phone app control | Yes | — |
| Compatible software | Easel, Candle, UGS | Easel, Fusion 360, Vectric VCarve |
| Controller / firmware | GRBL | GRBL |
| CNC milling | ||
| Spindle power | 710 W | 3,000 W |
| Max spindle speed | 30,000 rpm | 30,000 rpm |
| Size & power | ||
| Width | 693 mm | 1,292 mm |
| Depth | 658 mm | 1,290 mm |
| Height | 590 mm | 404 mm |
| Weight | — | 38.3 kg |
| Input voltage | 110–230 V | — |
