- Processing Talk
- Compare
- PRONAX Spark vs TTC6050
Genmitsu PRONAX Spark vs Two Trees TTC6050
What PRONAX Spark does better (8) and where TTC6050 wins (2) — every spec side by side.
vs
9.1Power & cutting5.9
9.2Speed7.0
8.5Precision5.8
9.0Work area7.8
6.5Safety6.5
9.0Features & ease of use5.2
Dimensions
Size comparison
PRONAX SparkTTC6050
| PRONAX Spark | TTC6050 | Difference | |
|---|---|---|---|
| Height | 510 mm | 530 mm | −20 mm |
| Width | 968 mm | 811 mm | +157 mm |
| Depth | 1,225 mm | 769 mm | +456 mm |
| Weight | 62.3 kg | 35.9 kg | +26.4 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is PRONAX Spark better than TTC6050?
- Spindle power2,200 W vs 500 W4.4×
- Work area (surface)5,400 cm² vs 3,000 cm²+80%
- Closed-loop motors / servosYes · TTC6050: No
- Automatic tool changerYes · TTC6050: No
- Max engraving / travel speed104 mm/s vs 83 mm/s+25%
- Tool length / Z probeYes · TTC6050: No
- Z travel118 mm vs 100 mm+18%
- Work area depth (Y)900 mm vs 500 mm+80%
Why is TTC6050 better than PRONAX Spark?
- Laser module option (CNC)No · PRONAX Spark: Yes
- Weight62.3 kg vs 35.9 kg+74%
Specifications
Side by side
| General | ||
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Frame material | Steel | Aluminium |
| Work area | ||
| Work area | 600 × 900 mm | 600 × 500 mm |
| Work area width (X) | 600 mm | 600 mm |
| Work area depth (Y) | 900 mm | 500 mm |
| Work area (surface) | 5,400 cm² | 3,000 cm² |
| Z travel | 118 mm | 100 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 104 mm/s | 83 mm/s |
| Precision | ||
| Closed-loop motors / servos | Yes | No |
| Linear rails | Yes | Yes |
| Ball screws | Yes | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Emergency stop button | Yes | Yes |
| Features | ||
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | Yes | Yes |
| Laser module option (CNC) | No | Yes |
| Automatic tool changer | Yes | No |
| Tool length / Z probe | Yes | No |
| Connectivity & software | ||
| Connections | USB | USB |
| USB | Yes | Yes |
| Compatible software | Easel, Candle, UGS | Easel, Fusion 360, Vectric VCarve |
| Controller / firmware | GRBL | GRBL |
| File formats | — | NC, G-code |
| CNC milling | ||
| Spindle power | 2,200 W | 500 W |
| Max spindle speed | — | 12,000 rpm |
| Size & power | ||
| Width | 968 mm | 811 mm |
| Depth | 1,225 mm | 769 mm |
| Height | 510 mm | 530 mm |
| Weight | 62.3 kg | 35.9 kg |
| Input voltage | 110–230 V | — |
