- Processing Talk
- Compare
- PRONAX Spark vs TTC-H40
Genmitsu PRONAX Spark vs Two Trees TTC-H40
What PRONAX Spark does better (5) and where TTC-H40 wins (6) — every spec side by side.
vs
9.1Power & cutting9.7
9.2Speed3.0
8.5Precision6.4
9.0Work area8.6
6.5Safety6.5
9.0Features & ease of use5.7
Dimensions
Size comparison
PRONAX SparkTTC-H40
| PRONAX Spark | TTC-H40 | Difference | |
|---|---|---|---|
| Height | 510 mm | 404 mm | +106 mm |
| Width | 968 mm | 1,292 mm | −324 mm |
| Depth | 1,225 mm | 1,290 mm | −65 mm |
| Weight | 62.3 kg | 38.3 kg | +24 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is PRONAX Spark better than TTC-H40?
- Max engraving / travel speed104 mm/s vs 30 mm/s3.5×
- Closed-loop motors / servosYes · TTC-H40: No
- Automatic tool changerYes · TTC-H40: No
- Tool length / Z probeYes · TTC-H40: No
- Z travel118 mm vs 100 mm+18%
Why is TTC-H40 better than PRONAX Spark?
- Work area (surface)5,400 cm² vs 10,000 cm²+85%
- Spindle power2,200 W vs 3,000 W+36%
- Laser module option (CNC)No · PRONAX Spark: Yes
- Work area width (X)600 mm vs 1,000 mm+67%
- Weight62.3 kg vs 38.3 kg+63%
- Work area depth (Y)900 mm vs 1,000 mm+11%
Specifications
Side by side
| General | ||
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Frame material | Steel | Aluminium |
| Work area | ||
| Work area | 600 × 900 mm | 1000 × 1000 mm |
| Work area width (X) | 600 mm | 1,000 mm |
| Work area depth (Y) | 900 mm | 1,000 mm |
| Work area (surface) | 5,400 cm² | 10,000 cm² |
| Z travel | 118 mm | 100 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 104 mm/s | 30 mm/s |
| Precision | ||
| Positioning accuracy | — | 0.05 mm |
| Closed-loop motors / servos | Yes | No |
| Linear rails | Yes | Yes |
| Ball screws | Yes | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Emergency stop button | Yes | Yes |
| Features | ||
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | Yes | Yes |
| Laser module option (CNC) | No | Yes |
| Automatic tool changer | Yes | No |
| Tool length / Z probe | Yes | No |
| Connectivity & software | ||
| Connections | USB | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | Easel, Candle, UGS | Easel, Fusion 360, Vectric VCarve |
| Controller / firmware | GRBL | GRBL |
| CNC milling | ||
| Spindle power | 2,200 W | 3,000 W |
| Max spindle speed | — | 30,000 rpm |
| Size & power | ||
| Width | 968 mm | 1,292 mm |
| Depth | 1,225 mm | 1,290 mm |
| Height | 510 mm | 404 mm |
| Weight | 62.3 kg | 38.3 kg |
| Input voltage | 110–230 V | — |
