- Processing Talk
- Compare
- Kiosk 10W vs S9 Pro 10W
Genmitsu Kiosk 10W vs Sculpfun S9 Pro 10W
What Kiosk 10W does better (1) and where S9 Pro 10W wins (3) — every spec side by side.
vs
5.7Power & cutting6.3
7.6Precision7.6
2.7Work area8.2
Why is Kiosk 10W better than S9 Pro 10W?
- Weight2.8 kg vs 3 kg+7%
Why is S9 Pro 10W better than Kiosk 10W?
- Work area (surface)100 cm² vs 1,640 cm²16.4×
- Work area width (X)100 mm vs 400 mm4×
- Work area depth (Y)100 mm vs 410 mm4.1×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 450 nm |
| Laser power | ||
| Laser output power | 10 W | 10 W |
| Work area | ||
| Work area | 100 × 100 mm | 400 × 410 mm |
| Work area width (X) | 100 mm | 400 mm |
| Work area depth (Y) | 100 mm | 410 mm |
| Work area (surface) | 100 cm² | 1,640 cm² |
| Max workpiece height | 70 mm | — |
| Speed & cutting | ||
| Max engraving / travel speed | 200 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 15 mm |
| Precision | ||
| Positioning accuracy | 0.01 mm | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | No | — |
| Flame / fire detection | No | — |
| Emergency stop button | No | — |
| Tilt / movement sensor | Yes | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | — |
| Built-in camera | No | — |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | — |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | USB |
| Wi-Fi | Yes | — |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 235 mm | — |
| Depth | 280 mm | — |
| Height | 220 mm | — |
| Weight | 2.8 kg | 3 kg |
| Input voltage | — | 100–240 V |
