- Processing Talk
- Compare
- Kintix Hybrid 5W vs Ray2 15W
Genmitsu Kintix Hybrid 5W vs Longer Ray2 15W
What Kintix Hybrid 5W does better (4) and where Ray2 15W wins (3) — every spec side by side.
vs
3.2Power & cutting6.5
9.6Speed4.5
7.2Precision8.6
3.9Work area2.5
7.3Safety8.3
6.2Features & ease of use5.0
Why is Kintix Hybrid 5W better than Ray2 15W?
- Max engraving / travel speed1,500 mm/s vs 200 mm/s7.5×
- Work area (surface)200 cm² vs 143 cm²+40%
- Autofocus / auto heightYes · Ray2 15W: No
- Work area width (X)200 mm vs 130 mm+54%
Why is Ray2 15W better than Kintix Hybrid 5W?
- Laser output power5 W vs 15 W3×
- Air assistNo · Kintix Hybrid 5W: Yes
- Work area depth (Y)100 mm vs 110 mm+10%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Galvo (scanning mirrors) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 5 W | 15 W |
| Work area | ||
| Work area | 200 × 100 mm | 130 × 110 mm |
| Work area width (X) | 200 mm | 130 mm |
| Work area depth (Y) | 100 mm | 110 mm |
| Work area (surface) | 200 cm² | 143 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 1,500 mm/s | 200 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 10 mm |
| Precision | ||
| Laser spot size | — | 0.06 mm |
| Positioning accuracy | 0.01 mm | — |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Laser safety class | Class 1 (eye-safe, enclosed) | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | No | No |
| Emergency stop button | Yes | — |
| Lid interlock | Yes | — |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | No |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | — |
| Wi-Fi | Yes | — |
| USB | Yes | — |
| SD / TF card | Yes | — |
| Phone app control | Yes | — |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, BMP, PNG, SVG, DXF, PLT, HPGL | — |
| Size & power | ||
| Rated power consumption | 60 W | — |









