- Processing Talk
- Compare
- Beambox II 55W vs Reno 65W
FLUX Beambox II 55W vs Monport Reno 65W
What Beambox II 55W does better (3) and where Reno 65W wins (4) — every spec side by side.
vs
5.7Power & cutting6.1
8.1Speed3.5
4.8Work area6.2
8.0Safety4.7
8.9Features & ease of use7.1
Dimensions
Size comparison
Beambox II 55WReno 65W
| Beambox II 55W | Reno 65W | Difference | |
|---|---|---|---|
| Height | 334 mm | 285 mm | +49 mm |
| Width | 1,005 mm | 800 mm | +205 mm |
| Depth | 692 mm | 575 mm | +117 mm |
| Weight | 48.5 kg | 30.4 kg | +18.1 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Beambox II 55W better than Reno 65W?
- Max engraving / travel speed900 mm/s vs 500 mm/s+80%
- Built-in cameraYes · Reno 65W: No
- Work area depth (Y)375 mm vs 356 mm+5%
Why is Reno 65W better than Beambox II 55W?
- Laser output power55 W vs 65 W+18%
- Work area (surface)2,250 cm² vs 2,531 cm²+12%
- Weight48.5 kg vs 30.4 kg+60%
- Work area width (X)600 mm vs 711 mm+19%
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | — | No |
| Wavelength | 10,600 nm | 10,600 nm |
| Laser power | ||
| Laser output power | 55 W | 65 W |
| Work area | ||
| Work area | 600 × 375 mm | 711 × 356 mm |
| Work area width (X) | 600 mm | 711 mm |
| Work area depth (Y) | 375 mm | 356 mm |
| Work area (surface) | 2,250 cm² | 2,531 cm² |
| Pass-through slot | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 900 mm/s | 500 mm/s |
| Max cutting depth – wood / plywood (one pass) | 18 mm | — |
| Max cutting depth – acrylic | 20 mm | — |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | Yes | Yes |
| Touchscreen / control panel | Yes | Yes |
| Water cooling | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, Ethernet | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Ethernet (LAN) | Yes | — |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, Beam Studio | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, SVG, DXF, AI, PDF | — |
| Size & power | ||
| Width | 1,005 mm | 800 mm |
| Depth | 692 mm | 575 mm |
| Height | 334 mm | 285 mm |
| Weight | 48.5 kg | 30.4 kg |
| Rated power consumption | — | 45 W |
