- Processing Talk
- Compare
- PHECDA 10W vs LM2 S2 10W
Elegoo PHECDA 10W vs Ortur LM2 S2 10W
What PHECDA 10W does better (2) and where LM2 S2 10W wins (1) — every spec side by side.
vs
4.8Power & cutting5.0
5.8Safety4.9
6.4Features & ease of use2.7
Why is PHECDA 10W better than LM2 S2 10W?
- Air assistYes · LM2 S2 10W: No
- Wi-FiYes · LM2 S2 10W: No
Why is LM2 S2 10W better than PHECDA 10W?
- Max cutting depth – wood / plywood (one pass)8 mm vs 12 mm+50%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 10 W | 10 W |
| Work area | ||
| Work area | 400 × 400 mm | — |
| Work area width (X) | 400 mm | — |
| Work area depth (Y) | 400 mm | — |
| Work area (surface) | 1,600 cm² | — |
| Speed & cutting | ||
| Max engraving / travel speed | 417 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | 8 mm | 12 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Precision | ||
| Laser spot size | 0.06 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Tilt / movement sensor | Yes | Yes |
| Built-in fume filter / purifier | Yes | — |
| Exhaust fan | Yes | — |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | — |
| Connectivity & software | ||
| Connections | USB, SD / USB drive | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | SVG, DXF, JPG, PNG, BMP, TIF | — |
| Size & power | ||
| Width | 673 mm | — |
| Depth | 660 mm | — |
| Height | 190 mm | — |
| Weight | 6.5 kg | — |
| Rated power consumption | 55 W | — |
