- Processing Talk
- Compare
- PHECDA 10W vs X10 Pro
Elegoo PHECDA 10W vs Ikier X10 Pro
What PHECDA 10W does better (5) and where X10 Pro wins (4) — every spec side by side.
vs
4.8Power & cutting6.7
6.6Speed6.1
8.7Precision5.5
7.7Work area7.1
5.8Safety6.4
6.4Features & ease of use6.4
Dimensions
Size comparison
PHECDA 10WX10 Pro
| PHECDA 10W | X10 Pro | Difference | |
|---|---|---|---|
| Height | 190 mm | 178 mm | +12 mm |
| Width | 673 mm | 178 mm | +495 mm |
| Depth | 660 mm | 254 mm | +406 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is PHECDA 10W better than X10 Pro?
- Air assistYes · X10 Pro: No
- Laser spot size0.06 mm vs 0.08 mm+33%
- Work area (surface)1,600 cm² vs 1,558 cm²+3%
- Max engraving / travel speed417 mm/s vs 400 mm/s+4%
- Work area depth (Y)400 mm vs 380 mm+5%
Why is X10 Pro better than PHECDA 10W?
- Autofocus / auto heightNo · PHECDA 10W: Yes
- Laser output power10 W vs 12 W+20%
- Flame / fire detectionNo · PHECDA 10W: Yes
- Work area width (X)400 mm vs 410 mm+2%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | 455 nm |
| Laser power | ||
| Laser output power | 10 W | 12 W |
| Work area | ||
| Work area | 400 × 400 mm | 410 × 380 mm |
| Work area width (X) | 400 mm | 410 mm |
| Work area depth (Y) | 400 mm | 380 mm |
| Work area (surface) | 1,600 cm² | 1,558 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 417 mm/s | 400 mm/s |
| Max cutting depth – wood / plywood (one pass) | 8 mm | — |
| Precision | ||
| Laser spot size | 0.06 mm | 0.08 mm |
| Positioning accuracy | — | 0.02 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Tilt / movement sensor | Yes | — |
| Built-in fume filter / purifier | Yes | — |
| Exhaust fan | Yes | — |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | — |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB, SD / USB drive | USB, Wi-Fi |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Phone app control | Yes | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL, AtomStack Studio |
| LightBurn compatible | Yes | Yes |
| File formats | SVG, DXF, JPG, PNG, BMP, TIF | JPG, SVG, PNG, BMP, PDF, G-code, DXF |
| Size & power | ||
| Width | 673 mm | 178 mm |
| Depth | 660 mm | 254 mm |
| Height | 190 mm | 178 mm |
| Weight | 6.5 kg | — |
| Rated power consumption | 55 W | — |
