- Processing Talk
- Compare
- AL1 5.5W vs S30 5W
Aufero AL1 5.5W vs Sculpfun S30 5W
What AL1 5.5W does better (1) and where S30 5W wins (4) — every spec side by side.
Why is AL1 5.5W better than S30 5W?
- Laser output power5.5 W vs 5 W+10%
Why is S30 5W better than AL1 5.5W?
- Work area (surface)324 cm² vs 1,463 cm²4.5×
- Air assistNo · AL1 5.5W: Yes
- Work area depth (Y)180 mm vs 385 mm2.1×
- Work area width (X)180 mm vs 380 mm2.1×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 5.5 W | 5 W |
| Work area | ||
| Work area | 180 × 180 mm | 380 × 385 mm |
| Work area width (X) | 180 mm | 380 mm |
| Work area depth (Y) | 180 mm | 385 mm |
| Work area (surface) | 324 cm² | 1,463 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 83 mm/s | — |
| Precision | ||
| Laser spot size | — | 0.06 mm |
| Positioning accuracy | — | 0.005 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, Bluetooth, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| Bluetooth | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | NC, DXF, BMP, JPG, PNG, SVG | — |
| Size & power | ||
| Rated power consumption | — | 60 W |
