- Processing Talk
- Compare
- AL1 5.5W vs LM2 Pro S2 5.5W
Aufero AL1 5.5W vs Ortur LM2 Pro S2 5.5W
What AL1 5.5W does better (0) and where LM2 Pro S2 5.5W wins (6) — every spec side by side.
vs
3.8Power & cutting4.2
2.2Speed4.8
4.4Work area7.7
3.2Safety7.1
3.4Features & ease of use4.6
Why is AL1 5.5W better than LM2 Pro S2 5.5W?
AL1 5.5W has no measurable advantages in this pair.
Why is LM2 Pro S2 5.5W better than AL1 5.5W?
- Work area (surface)324 cm² vs 1,600 cm²4.9×
- Max engraving / travel speed83 mm/s vs 250 mm/s3×
- Air assistNo · AL1 5.5W: Yes
- Work area width (X)180 mm vs 400 mm2.2×
- Work area depth (Y)180 mm vs 400 mm2.2×
- Flame / fire detectionNo · AL1 5.5W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 5.5 W | 5.5 W |
| Work area | ||
| Work area | 180 × 180 mm | 400 × 400 mm |
| Work area width (X) | 180 mm | 400 mm |
| Work area depth (Y) | 180 mm | 400 mm |
| Work area (surface) | 324 cm² | 1,600 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 83 mm/s | 250 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 12 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | No |
| USB | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | NC, DXF, BMP, JPG, PNG, SVG | — |
| Size & power | ||
| Width | — | 600 mm |
| Depth | — | 570 mm |
| Height | — | 130 mm |
