- Processing Talk
- Compare
- Hurricane 55W vs Reno Pro&Vision 65W
AtomStack Hurricane 55W vs Monport Reno Pro&Vision 65W
What Hurricane 55W does better (2) and where Reno Pro&Vision 65W wins (3) — every spec side by side.
vs
5.6Power & cutting6.1
6.0Speed6.0
4.5Work area3.5
8.4Safety4.8
8.8Features & ease of use6.9
Dimensions
Size comparison
Hurricane 55WReno Pro&Vision 65W
| Hurricane 55W | Reno Pro&Vision 65W | Difference | |
|---|---|---|---|
| Height | 235 mm | 285 mm | −50 mm |
| Width | 1,042 mm | 800 mm | +242 mm |
| Depth | 695 mm | 575 mm | +120 mm |
| Weight | 59 kg | 30.4 kg | +28.6 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Hurricane 55W better than Reno Pro&Vision 65W?
- Built-in cameraYes · Reno Pro&Vision 65W: No
- Work area width (X)500 mm vs 440 mm+14%
Why is Reno Pro&Vision 65W better than Hurricane 55W?
- Laser output power55 W vs 65 W+18%
- Weight59 kg vs 30.4 kg+94%
- Work area depth (Y)300 mm vs 340 mm+13%
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 10,600 nm | 10,600 nm |
| Laser power | ||
| Laser output power | 55 W | 65 W |
| Work area | ||
| Work area | 500 × 300 mm | 440 × 340 mm |
| Work area width (X) | 500 mm | 440 mm |
| Work area depth (Y) | 300 mm | 340 mm |
| Work area (surface) | 1,500 cm² | 1,496 cm² |
| Pass-through slot | Yes | Yes |
| Conveyor / roll feeder support | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | 18 mm | — |
| Max cutting depth – acrylic | 20 mm | — |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Flame / fire detection | Yes | — |
| Emergency stop button | Yes | — |
| Tilt / movement sensor | Yes | — |
| Built-in fume filter / purifier | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Water cooling | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, AtomStack Studio | LightBurn, Inkscape |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 1,042 mm | 800 mm |
| Depth | 695 mm | 575 mm |
| Height | 235 mm | 285 mm |
| Weight | 59 kg | 30.4 kg |
| Rated power consumption | — | 45 W |
Related comparisons
vs
xTool P2S 55WvsAtomStack Hurricane 55W
5.56.4
vs
AtomStack Hurricane 55WvsOMTech Pronto 35 60W
6.46.8
vs
AtomStack Hurricane 55WvsMonport Effi7S 90W
6.46.6
vs
AtomStack Hurricane 55WvsMonport Effi7 90W
6.46.6
vs
AtomStack Hurricane 55WvsOMTech Maker AF2028-60 60W
6.46.1
vs
AtomStack Hurricane 55WvsGlowforge Plus HD