- Processing Talk
- Compare
- A40 Pro V2 vs X70 Max
AtomStack A40 Pro V2 vs AtomStack X70 Max
What A40 Pro V2 does better (0) and where X70 Max wins (3) — every spec side by side.
vs
6.9Work area9.7
6.4Safety6.4
9.4Features & ease of use8.4
Why is A40 Pro V2 better than X70 Max?
A40 Pro V2 has no measurable advantages in this pair.
Why is X70 Max better than A40 Pro V2?
- Work area (surface)1,540 cm² vs 6,800 cm²4.4×
- Work area depth (Y)400 mm vs 850 mm2.1×
- Work area width (X)385 mm vs 800 mm2.1×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | — | 77 W |
| Work area | ||
| Work area | 385 × 400 mm | 800 × 850 mm |
| Work area width (X) | 385 mm | 800 mm |
| Work area depth (Y) | 400 mm | 850 mm |
| Work area (surface) | 1,540 cm² | 6,800 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | — | 400 mm/s |
| Max cutting depth – acrylic | — | 25 mm |
| Precision | ||
| Laser spot size | — | 0.18 mm |
| Positioning accuracy | — | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| Compatible software | — | LightBurn, LaserGRBL, AtomStack Studio |
| LightBurn compatible | — | Yes |
| Size & power | ||
| Width | — | 1,056 mm |
| Depth | — | 1,168 mm |
| Height | — | 230 mm |
| Rated power consumption | — | 360 W |
| Input voltage | — | 100–240 V |
