- Processing Talk
- Compare
- A10 Pro V2 vs S30 5W
AtomStack A10 Pro V2 vs Sculpfun S30 5W
What A10 Pro V2 does better (4) and where S30 5W wins (3) — every spec side by side.
vs
6.3Power & cutting3.2
5.5Precision9.0
7.1Work area6.6
6.4Safety3.2
4.0Features & ease of use6.6
Why is A10 Pro V2 better than S30 5W?
- Laser output power10 W vs 5 W2×
- Work area (surface)1,558 cm² vs 1,463 cm²+6%
- Flame / fire detectionYes · S30 5W: No
- Work area width (X)410 mm vs 380 mm+8%
Why is S30 5W better than A10 Pro V2?
- Positioning accuracy0.02 mm vs 0.005 mm4×
- Air assistNo · A10 Pro V2: Yes
- Laser spot size0.08 mm vs 0.06 mm+33%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | 455 nm |
| Laser power | ||
| Laser output power | 10 W | 5 W |
| Work area | ||
| Work area | 410 × 380 mm | 380 × 385 mm |
| Work area width (X) | 410 mm | 380 mm |
| Work area depth (Y) | 380 mm | 385 mm |
| Work area (surface) | 1,558 cm² | 1,463 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | 12 mm | — |
| Max cutting depth – acrylic | 10 mm | — |
| Precision | ||
| Laser spot size | 0.08 mm | 0.06 mm |
| Positioning accuracy | 0.02 mm | 0.005 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | No |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi, Bluetooth, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Bluetooth | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, LaserGRBL, AtomStack Studio | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, SVG, PNG, BMP, PDF, G-code, DXF | — |
| Size & power | ||
| Width | 178 mm | — |
| Depth | 254 mm | — |
| Height | 178 mm | — |
| Weight | 6 kg | — |
| Rated power consumption | 50 W | 60 W |
