- Processing Talk
- Compare
- A10 Pro V2 vs LM2 S2 1.6W
AtomStack A10 Pro V2 vs Ortur LM2 S2 1.6W
What A10 Pro V2 does better (4) and where LM2 S2 1.6W wins (0) — every spec side by side.
vs
6.3Power & cutting3.5
6.4Safety4.9
4.0Features & ease of use2.7
Why is A10 Pro V2 better than LM2 S2 1.6W?
- Laser output power10 W vs 1.6 W6.2×
- Max cutting depth – acrylic10 mm vs 5 mm2×
- Flame / fire detectionYes · LM2 S2 1.6W: No
- Wi-FiYes · LM2 S2 1.6W: No
Why is LM2 S2 1.6W better than A10 Pro V2?
LM2 S2 1.6W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 10 W | 1.6 W |
| Work area | ||
| Work area | 410 × 380 mm | — |
| Work area width (X) | 410 mm | — |
| Work area depth (Y) | 380 mm | — |
| Work area (surface) | 1,558 cm² | — |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | 12 mm | 12 mm |
| Max cutting depth – acrylic | 10 mm | 5 mm |
| Precision | ||
| Laser spot size | 0.08 mm | — |
| Positioning accuracy | 0.02 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | No |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | No | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| Compatible software | LightBurn, LaserGRBL, AtomStack Studio | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, SVG, PNG, BMP, PDF, G-code, DXF | — |
| Size & power | ||
| Width | 178 mm | — |
| Depth | 254 mm | — |
| Height | 178 mm | — |
| Weight | 6 kg | — |
| Rated power consumption | 50 W | — |
