- Processing Talk
- Compare
- Pixi Red 10W vs C2 14W
Algolaser Pixi Red 10W vs Sculpfun C2 14W
What Pixi Red 10W does better (2) and where C2 14W wins (6) — every spec side by side.
vs
5.7Power & cutting5.2
2.4Speed5.3
9.4Precision9.4
2.3Work area4.8
8.6Safety5.6
8.2Features & ease of use4.6
Dimensions
Size comparison
Pixi Red 10WC2 14W
| Pixi Red 10W | C2 14W | Difference | |
|---|---|---|---|
| Height | 196 mm | 143 mm | +53 mm |
| Width | 265 mm | 456 mm | −191 mm |
| Depth | 214 mm | 442 mm | −228 mm |
| Weight | 3.8 kg | 1.6 kg | +2.2 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Pixi Red 10W better than C2 14W?
- Enclosed (fully covered)Yes · C2 14W: No
- Built-in cameraYes · C2 14W: No
Why is C2 14W better than Pixi Red 10W?
- Work area (surface)100 cm² vs 900 cm²9×
- Max engraving / travel speed100 mm/s vs 333 mm/s3.3×
- Laser output power10 W vs 14 W+40%
- Work area width (X)100 mm vs 300 mm3×
- Work area depth (Y)100 mm vs 300 mm3×
- Weight3.8 kg vs 1.6 kg2.4×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 450 nm | 455 nm |
| Laser power | ||
| Laser output power | 10 W | 14 W |
| Work area | ||
| Work area | 100 × 100 mm | 300 × 300 mm |
| Work area width (X) | 100 mm | 300 mm |
| Work area depth (Y) | 100 mm | 300 mm |
| Work area (surface) | 100 cm² | 900 cm² |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 100 mm/s | 333 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 8 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Precision | ||
| Laser spot size | 0.04 mm | 0.04 mm |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Flame / fire detection | No | No |
| Emergency stop button | — | Yes |
| Built-in fume filter / purifier | Yes | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | — |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | No |
| USB | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 265 mm | 456 mm |
| Depth | 214 mm | 442 mm |
| Height | 196 mm | 143 mm |
| Weight | 3.8 kg | 1.6 kg |
