- Processing Talk
- Compare
- Pixi 5W vs LM2 S2 5.5W
Algolaser Pixi 5W vs Ortur LM2 S2 5.5W
What Pixi 5W does better (2) and where LM2 S2 5.5W wins (1) — every spec side by side.
vs
3.2Power & cutting4.2
4.9Safety4.9
8.2Features & ease of use2.7
Why is Pixi 5W better than LM2 S2 5.5W?
- Air assistYes · LM2 S2 5.5W: No
- Built-in cameraYes · LM2 S2 5.5W: No
Why is LM2 S2 5.5W better than Pixi 5W?
- Laser output power5 W vs 5.5 W+10%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 450 nm | — |
| Laser power | ||
| Laser output power | 5 W | 5.5 W |
| Work area | ||
| Work area | 100 × 100 mm | — |
| Work area width (X) | 100 mm | — |
| Work area depth (Y) | 100 mm | — |
| Work area (surface) | 100 cm² | — |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 100 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 12 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Precision | ||
| Laser spot size | 0.04 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Tilt / movement sensor | — | Yes |
| Built-in fume filter / purifier | Yes | — |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | Yes | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | — |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | No |
| USB | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 265 mm | — |
| Depth | 214 mm | — |
| Height | 196 mm | — |
| Weight | 3.8 kg | — |
