- Processing Talk
- Compare
- Extended 10W vs R1 1.3W
Algolaser Extended 10W vs Ortur R1 1.3W
What Extended 10W does better (9) and where R1 1.3W wins (2) — every spec side by side.
vs
5.7Power & cutting2.0
4.4Speed2.2
6.2Precision3.3
7.7Work area2.3
4.9Safety7.7
8.4Features & ease of use2.2
Dimensions
Size comparison
Extended 10WR1 1.3W
| Extended 10W | R1 1.3W | Difference | |
|---|---|---|---|
| Height | 182 mm | 140 mm | +42 mm |
| Width | 642 mm | 272 mm | +370 mm |
| Depth | 602 mm | 250 mm | +352 mm |
| Weight | 4.8 kg | 2.4 kg | +2.4 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Extended 10W better than R1 1.3W?
- Laser output power10 W vs 1.3 W7.7×
- Work area (surface)1,600 cm² vs 100 cm²16×
- Max engraving / travel speed200 mm/s vs 83 mm/s2.4×
- Air assistYes · R1 1.3W: No
- Built-in cameraYes · R1 1.3W: No
- Laser spot size0.08 mm vs 0.11 mm+38%
- Work area width (X)400 mm vs 100 mm4×
- Work area depth (Y)400 mm vs 100 mm4×
- Wi-FiYes · R1 1.3W: No
Why is R1 1.3W better than Extended 10W?
- Enclosed (fully covered)No · Extended 10W: Yes
- Weight4.8 kg vs 2.4 kg2×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm), Infrared diode (1064 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | 450 nm |
| Laser power | ||
| Laser output power | 10 W | 1.3 W |
| Work area | ||
| Work area | 400 × 400 mm | 100 × 100 mm |
| Work area width (X) | 400 mm | 100 mm |
| Work area depth (Y) | 400 mm | 100 mm |
| Work area (surface) | 1,600 cm² | 100 cm² |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 200 mm/s | 83 mm/s |
| Precision | ||
| Laser spot size | 0.08 mm | 0.11 mm |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Laser safety class | — | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | No | No |
| Tilt / movement sensor | — | Yes |
| Built-in fume filter / purifier | Yes | — |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | Yes | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | — |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | SD / USB drive | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Phone app control | — | Yes |
| Compatible software | LightBurn, LaserGRBL | — |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Width | 642 mm | 272 mm |
| Depth | 602 mm | 250 mm |
| Height | 182 mm | 140 mm |
| Weight | 4.8 kg | 2.4 kg |
| Rated power consumption | 120 W | — |
