- Processing Talk
- Compare
- S2 12W vs S9 Pro 10W
Acmer S2 12W vs Sculpfun S9 Pro 10W
What S2 12W does better (1) and where S9 Pro 10W wins (3) — every spec side by side.
vs
6.7Power & cutting6.3
8.7Precision7.6
4.8Work area8.2
Why is S2 12W better than S9 Pro 10W?
- Laser output power12 W vs 10 W+20%
Why is S9 Pro 10W better than S2 12W?
- Work area (surface)900 cm² vs 1,640 cm²+82%
- Work area depth (Y)300 mm vs 410 mm+37%
- Work area width (X)300 mm vs 400 mm+33%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 450 nm |
| Laser power | ||
| Laser output power | 12 W | 10 W |
| Work area | ||
| Work area | 300 × 300 mm | 400 × 410 mm |
| Work area width (X) | 300 mm | 400 mm |
| Work area depth (Y) | 300 mm | 410 mm |
| Work area (surface) | 900 cm² | 1,640 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 15 mm |
| Precision | ||
| Laser spot size | 0.06 mm | — |
| Positioning accuracy | — | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | No | — |
| Flame / fire detection | No | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | — |
| Built-in camera | No | — |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | — |
| Connectivity & software | ||
| Connections | — | USB |
| USB | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 490 mm | — |
| Depth | 500 mm | — |
| Height | 195 mm | — |
| Weight | — | 3 kg |
| Input voltage | — | 100–240 V |
