- Processing Talk
- Compare
- S1 2.5W vs Kiosk 2.5W
Acmer S1 2.5W vs Genmitsu Kiosk 2.5W
What S1 2.5W does better (4) and where Kiosk 2.5W wins (2) — every spec side by side.
vs
2.3Power & cutting2.3
3.5Speed4.4
9.4Precision7.6
2.9Work area2.7
3.2Safety2.1
2.4Features & ease of use7.4
Dimensions
Size comparison
S1 2.5WKiosk 2.5W
| S1 2.5W | Kiosk 2.5W | Difference | |
|---|---|---|---|
| Height | 162 mm | 220 mm | −58 mm |
| Width | 250 mm | 235 mm | +15 mm |
| Depth | 250 mm | 280 mm | −30 mm |
| Weight | 1.5 kg | 2.8 kg | −1.3 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is S1 2.5W better than Kiosk 2.5W?
- Work area (surface)169 cm² vs 100 cm²+69%
- Weight1.5 kg vs 2.8 kg+87%
- Work area width (X)130 mm vs 100 mm+30%
- Work area depth (Y)130 mm vs 100 mm+30%
Why is Kiosk 2.5W better than S1 2.5W?
- Air assistNo · S1 2.5W: Yes
- Max engraving / travel speed167 mm/s vs 200 mm/s+20%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 2.5 W | 2.5 W |
| Work area | ||
| Work area | 130 × 130 mm | 100 × 100 mm |
| Work area width (X) | 130 mm | 100 mm |
| Work area depth (Y) | 130 mm | 100 mm |
| Work area (surface) | 169 cm² | 100 cm² |
| Max workpiece height | — | 70 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | 200 mm/s |
| Precision | ||
| Laser spot size | 0.04 mm | — |
| Positioning accuracy | — | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Emergency stop button | — | No |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | — | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | — | LightBurn, LaserGRBL |
| LightBurn compatible | — | Yes |
| Size & power | ||
| Width | 250 mm | 235 mm |
| Depth | 250 mm | 280 mm |
| Height | 162 mm | 220 mm |
| Weight | 1.5 kg | 2.8 kg |
