- Processing Talk
- Compare
- P3 48W vs K2 Pro 55W
Acmer P3 48W vs Ikier K2 Pro 55W
What P3 48W does better (2) and where K2 Pro 55W wins (4) — every spec side by side.
vs
9.4Power & cutting9.5
9.2Speed8.0
4.4Precision4.4
8.3Safety8.7
5.7Features & ease of use8.9
Why is P3 48W better than K2 Pro 55W?
- Built-in cameraYes · K2 Pro 55W: No
- Max engraving / travel speed800 mm/s vs 600 mm/s+33%
Why is K2 Pro 55W better than P3 48W?
- Air assistNo · P3 48W: Yes
- Autofocus / auto heightNo · P3 48W: Yes
- Laser output power48 W vs 55 W+15%
- Flame / fire detectionNo · P3 48W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 48 W | 55 W |
| Work area | ||
| Work area | — | 500 × 320 mm |
| Work area width (X) | — | 500 mm |
| Work area depth (Y) | — | 320 mm |
| Work area (surface) | — | 1,600 cm² |
| Conveyor / roll feeder support | Yes | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 800 mm/s | 600 mm/s |
| Precision | ||
| Laser spot size | 0.1 mm | 0.1 mm |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Laser safety class | Class 1 (eye-safe, enclosed) | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | No | Yes |
| Tilt / movement sensor | — | Yes |
| Lid interlock | — | Yes |
| Exhaust fan | Yes | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| Compatible software | LightBurn | LightBurn, AtomStack Studio |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | — |
| Size & power | ||
| Width | — | 750 mm |
| Depth | — | 600 mm |
| Height | — | 261 mm |
| Weight | — | 23.6 kg |
