- Processing Talk
- Compare
- P3 48W vs L8 40W
Acmer P3 48W vs Genmitsu L8 40W
What P3 48W does better (3) and where L8 40W wins (1) — every spec side by side.
Why is P3 48W better than L8 40W?
- Laser output power48 W vs 40 W+20%
- Laser spot size0.1 mm vs 0.13 mm+30%
- Max engraving / travel speed800 mm/s vs 667 mm/s+20%
Why is L8 40W better than P3 48W?
- Air assistNo · P3 48W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 48 W | 40 W |
| Work area | ||
| Work area | — | 400 × 400 mm |
| Work area width (X) | — | 400 mm |
| Work area depth (Y) | — | 400 mm |
| Work area (surface) | — | 1,600 cm² |
| Conveyor / roll feeder support | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 800 mm/s | 667 mm/s |
| Precision | ||
| Laser spot size | 0.1 mm | 0.13 mm |
| Positioning accuracy | — | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Laser safety class | Class 1 (eye-safe, enclosed) | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | No | No |
| Exhaust fan | Yes | — |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | Yes | Yes |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | — | Wi-Fi |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | JPG, BMP, PNG, GIF, DXF, PLT, HPGL |
| Size & power | ||
| Width | — | 715 mm |
| Depth | — | 621 mm |
| Height | — | 261 mm |
| Rated power consumption | — | 240 W |
