- Processing Talk
- Compare
- P2 33W vs K8 Mini 10W
Acmer P2 33W vs Wainlux K8 Mini 10W
What P2 33W does better (6) and where K8 Mini 10W wins (2) — every spec side by side.
vs
8.6Power & cutting4.8
9.2Work area3.0
5.9Safety9.6
5.0Features & ease of use5.2
Why is P2 33W better than K8 Mini 10W?
- Laser output power33 W vs 10 W3.3×
- Work area (surface)3,360 cm² vs 169 cm²19.9×
- Max cutting depth – wood / plywood (one pass)30 mm vs 8 mm3.8×
- Air assistYes · K8 Mini 10W: No
- Work area width (X)420 mm vs 130 mm3.2×
- Work area depth (Y)800 mm vs 130 mm6.2×
Why is K8 Mini 10W better than P2 33W?
- Enclosed (fully covered)No · P2 33W: Yes
- Built-in cameraNo · P2 33W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 33 W | 10 W |
| Work area | ||
| Work area | 420 × 800 mm | 130 × 130 mm |
| Work area width (X) | 420 mm | 130 mm |
| Work area depth (Y) | 800 mm | 130 mm |
| Work area (surface) | 3,360 cm² | 169 cm² |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max cutting depth – wood / plywood (one pass) | 30 mm | 8 mm |
| Precision | ||
| Laser spot size | — | 0.08 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Flame / fire detection | No | No |
| Emergency stop button | Yes | — |
| Tilt / movement sensor | Yes | — |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | Yes |
| Autofocus / auto height | No | No |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Phone app control | — | Yes |
| Compatible software | LightBurn | — |
| LightBurn compatible | Yes | — |









