- Processing Talk
- Compare
- P2 10W vs S1 20W
Acmer P2 10W vs xTool S1 20W
What P2 10W does better (2) and where S1 20W wins (4) — every spec side by side.
Why is P2 10W better than S1 20W?
- Work area (surface)3,360 cm² vs 1,584 cm²2.1×
- Work area depth (Y)800 mm vs 318 mm2.5×
Why is S1 20W better than P2 10W?
- Laser output power10 W vs 20 W2×
- Enclosed (fully covered)No · P2 10W: Yes
- Flame / fire detectionNo · P2 10W: Yes
- Work area width (X)420 mm vs 498 mm+19%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 10 W | 20 W |
| Work area | ||
| Work area | 420 × 800 mm | 498 × 318 mm |
| Work area width (X) | 420 mm | 498 mm |
| Work area depth (Y) | 800 mm | 318 mm |
| Work area (surface) | 3,360 cm² | 1,584 cm² |
| Max workpiece height | — | 134 mm |
| Pass-through slot | — | Yes |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | — | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | 30 mm | — |
| Precision | ||
| Laser spot size | — | 0.1 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Laser safety class | — | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | No | Yes |
| Emergency stop button | Yes | Yes |
| Tilt / movement sensor | Yes | — |
| Lid interlock | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | — | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | — | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | — | 765 mm |
| Depth | — | 561 mm |
| Height | — | 183 mm |
| Weight | — | 20 kg |









