- Processing Talk
- Compare
- P1 S pro 6W vs AL1 5.5W
Acmer P1 S pro 6W vs Aufero AL1 5.5W
What P1 S pro 6W does better (6) and where AL1 5.5W wins (0) — every spec side by side.
vs
4.1Power & cutting3.8
3.5Speed2.2
6.2Work area4.4
3.2Safety3.2
5.7Features & ease of use3.4
Why is P1 S pro 6W better than AL1 5.5W?
- Work area (surface)1,406 cm² vs 324 cm²4.3×
- Max engraving / travel speed167 mm/s vs 83 mm/s2×
- Air assistYes · AL1 5.5W: No
- Laser output power6 W vs 5.5 W+9%
- Work area width (X)380 mm vs 180 mm2.1×
- Work area depth (Y)370 mm vs 180 mm2.1×
Why is AL1 5.5W better than P1 S pro 6W?
AL1 5.5W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 6 W | 5.5 W |
| Work area | ||
| Work area | 380 × 370 mm | 180 × 180 mm |
| Work area width (X) | 380 mm | 180 mm |
| Work area depth (Y) | 370 mm | 180 mm |
| Work area (surface) | 1,406 cm² | 324 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | 83 mm/s |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | NC, DXF, BMP, JPG, PNG, SVG |
