- Processing Talk
- Compare
- P1 S pro 6W vs LM2 S2 5.5W
Acmer P1 S pro 6W vs Ortur LM2 S2 5.5W
What P1 S pro 6W does better (2) and where LM2 S2 5.5W wins (0) — every spec side by side.
vs
4.1Power & cutting4.2
3.2Safety4.9
5.7Features & ease of use2.7
Why is P1 S pro 6W better than LM2 S2 5.5W?
- Air assistYes · LM2 S2 5.5W: No
- Laser output power6 W vs 5.5 W+9%
Why is LM2 S2 5.5W better than P1 S pro 6W?
LM2 S2 5.5W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 6 W | 5.5 W |
| Work area | ||
| Work area | 380 × 370 mm | — |
| Work area width (X) | 380 mm | — |
| Work area depth (Y) | 370 mm | — |
| Work area (surface) | 1,406 cm² | — |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 12 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | No |
| USB | — | Yes |
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | — |
