- Processing Talk
- Compare
- P1 S pro 36W vs H10 20W
Acmer P1 S pro 36W vs Ortur H10 20W
What P1 S pro 36W does better (1) and where H10 20W wins (4) — every spec side by side.
vs
8.6Power & cutting7.0
3.5Speed5.3
6.2Work area7.7
3.2Safety6.2
5.7Features & ease of use4.8
Why is P1 S pro 36W better than H10 20W?
- Laser output power36 W vs 20 W+80%
Why is H10 20W better than P1 S pro 36W?
- Max engraving / travel speed167 mm/s vs 333 mm/s+99%
- Work area (surface)1,406 cm² vs 1,600 cm²+14%
- Work area depth (Y)370 mm vs 400 mm+8%
- Work area width (X)380 mm vs 400 mm+5%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 450 nm |
| Laser power | ||
| Laser output power | 36 W | 20 W |
| Work area | ||
| Work area | 380 × 370 mm | 400 × 400 mm |
| Work area width (X) | 380 mm | 400 mm |
| Work area depth (Y) | 370 mm | 400 mm |
| Work area (surface) | 1,406 cm² | 1,600 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | 333 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 12 mm |
| Max cutting depth – acrylic | — | 8 mm |
| Precision | ||
| Laser spot size | — | 0.08 mm |
| Positioning accuracy | — | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Built-in fume filter / purifier | — | Yes |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | No |
| USB | — | Yes |
| Phone app control | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | — |
