- Processing Talk
- Compare
- P1 S pro 10W vs LM2 S2 10W
Acmer P1 S pro 10W vs Ortur LM2 S2 10W
What P1 S pro 10W does better (1) and where LM2 S2 10W wins (0) — every spec side by side.
vs
5.7Power & cutting5.0
3.2Safety4.9
5.7Features & ease of use2.7
Why is P1 S pro 10W better than LM2 S2 10W?
- Air assistYes · LM2 S2 10W: No
Why is LM2 S2 10W better than P1 S pro 10W?
LM2 S2 10W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 10 W | 10 W |
| Work area | ||
| Work area | 380 × 370 mm | — |
| Work area width (X) | 380 mm | — |
| Work area depth (Y) | 370 mm | — |
| Work area (surface) | 1,406 cm² | — |
| Speed & cutting | ||
| Max engraving / travel speed | 167 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | — | 12 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | No |
| USB | — | Yes |
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | — |
Related comparisons
vs
Sculpfun iCube Pro 5WvsAcmer P1 S pro 10W
4.95.2
vs
Sculpfun iCube Pro Max 10WvsAcmer P1 S pro 10W
5.05.2
vs
Acmer P1 S pro 10WvsWainlux K8 Mini 2.5W
5.25.2
vs
Two Trees TS2 10WvsAcmer P1 S pro 10W
5.95.2
vs
Sculpfun iCube 3WvsAcmer P1 S pro 10W
5.35.2
vs
Longer Ray7S 7.5WvsAcmer P1 S pro 10W
8.25.2