- Processing Talk
- Compare
- S10 10W vs TTS-10 Pro
Sculpfun S10 10W vs Two Trees TTS-10 Pro
What S10 10W does better (5) and where TTS-10 Pro wins (1) — every spec side by side.
vs
5.7Power & cutting5.7
7.2Precision5.2
7.2Work area4.8
3.2Safety3.2
4.6Features & ease of use6.4
Why is S10 10W better than TTS-10 Pro?
- Work area (surface)1,560 cm² vs 900 cm²+73%
- Positioning accuracy0.01 mm vs 0.08 mm8×
- Work area depth (Y)400 mm vs 300 mm+33%
- Work area width (X)390 mm vs 300 mm+30%
- Weight3.4 kg vs 3.6 kg+6%
Why is TTS-10 Pro better than S10 10W?
- Wi-FiNo · S10 10W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 10 W | 10 W |
| Work area | ||
| Work area | 390 × 400 mm | 300 × 300 mm |
| Work area width (X) | 390 mm | 300 mm |
| Work area depth (Y) | 400 mm | 300 mm |
| Work area (surface) | 1,560 cm² | 900 cm² |
| Work-area extension kit | Yes | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | — | 500 mm/s |
| Precision | ||
| Laser spot size | — | 0.08 mm |
| Positioning accuracy | 0.01 mm | 0.08 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Laser shield / filter cover | Yes | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | No | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Phone app control | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Weight | 3.4 kg | 3.6 kg |
| Rated power consumption | 36 W | — |
| Input voltage | 100–240 V | — |
