- Processing Talk
- Compare
- LM3 10W vs TTS-10 Pro
Ortur LM3 10W vs Two Trees TTS-10 Pro
What LM3 10W does better (3) and where TTS-10 Pro wins (0) — every spec side by side.
vs
5.7Power & cutting5.7
6.2Precision5.2
6.4Work area4.8
4.9Safety3.2
5.7Features & ease of use6.4
Why is LM3 10W better than TTS-10 Pro?
- Work area (surface)1,420 cm² vs 900 cm²+58%
- Work area width (X)400 mm vs 300 mm+33%
- Work area depth (Y)355 mm vs 300 mm+18%
Why is TTS-10 Pro better than LM3 10W?
TTS-10 Pro has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 10 W | 10 W |
| Work area | ||
| Work area | 400 × 355 mm | 300 × 300 mm |
| Work area width (X) | 400 mm | 300 mm |
| Work area depth (Y) | 355 mm | 300 mm |
| Work area (surface) | 1,420 cm² | 900 cm² |
| Work-area extension kit | Yes | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | — | 500 mm/s |
| Precision | ||
| Laser spot size | 0.08 mm | 0.08 mm |
| Positioning accuracy | — | 0.08 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Built-in fume filter / purifier | Yes | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Phone app control | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Weight | — | 3.6 kg |
