- Processing Talk
- Compare
- H10 10W vs TTS-20 Max
Ortur H10 10W vs Two Trees TTS-20 Max
What H10 10W does better (0) and where TTS-20 Max wins (1) — every spec side by side.
vs
5.3Speed6.9
Why is H10 10W better than TTS-20 Max?
H10 10W has no measurable advantages in this pair.
Why is TTS-20 Max better than H10 10W?
- Max engraving / travel speed333 mm/s vs 500 mm/s+50%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 450 nm | — |
| Laser power | ||
| Laser output power | 10 W | — |
| Work area | ||
| Work area | 400 × 400 mm | — |
| Work area width (X) | 400 mm | — |
| Work area depth (Y) | 400 mm | — |
| Work area (surface) | 1,600 cm² | — |
| Speed & cutting | ||
| Max engraving / travel speed | 333 mm/s | 500 mm/s |
| Max cutting depth – wood / plywood (one pass) | 12 mm | — |
| Max cutting depth – acrylic | 8 mm | — |
| Precision | ||
| Laser spot size | 0.08 mm | — |
| Positioning accuracy | 0.01 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | — |
| Flame / fire detection | No | — |
| Emergency stop button | Yes | — |
| Tilt / movement sensor | Yes | — |
| Built-in fume filter / purifier | Yes | — |
| Laser shield / filter cover | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | — |
| Autofocus / auto height | No | — |
| Rotary attachment support | Yes | — |
| Connectivity & software | ||
| Connections | USB | — |
| Wi-Fi | No | — |
| USB | Yes | — |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | — |
| LightBurn compatible | Yes | — |
