- Processing Talk
- Compare
- H10 10W vs S70 Max 70W
Ortur H10 10W vs Sculpfun S70 Max 70W
What H10 10W does better (1) and where S70 Max 70W wins (9) — every spec side by side.
vs
6.2Power & cutting9.2
5.3Speed8.0
7.0Precision3.4
7.7Work area9.6
6.2Safety7.2
4.8Features & ease of use7.7
Why is H10 10W better than S70 Max 70W?
- Laser spot size0.08 mm vs 0.15 mm+88%
Why is S70 Max 70W better than H10 10W?
- Laser output power10 W vs 70 W7×
- Work area (surface)1,600 cm² vs 6,640 cm²4.2×
- Max engraving / travel speed333 mm/s vs 600 mm/s+80%
- Max cutting depth – wood / plywood (one pass)12 mm vs 20 mm+67%
- Autofocus / auto heightNo · H10 10W: Yes
- Work area width (X)400 mm vs 830 mm2.1×
- Work area depth (Y)400 mm vs 800 mm2×
- Flame / fire detectionNo · H10 10W: Yes
- Wi-FiNo · H10 10W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 450 nm | — |
| Laser power | ||
| Laser output power | 10 W | 70 W |
| Work area | ||
| Work area | 400 × 400 mm | 830 × 800 mm |
| Work area width (X) | 400 mm | 830 mm |
| Work area depth (Y) | 400 mm | 800 mm |
| Work area (surface) | 1,600 cm² | 6,640 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 333 mm/s | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | 12 mm | 20 mm |
| Max cutting depth – acrylic | 8 mm | — |
| Precision | ||
| Laser spot size | 0.08 mm | 0.15 mm |
| Positioning accuracy | 0.01 mm | — |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Emergency stop button | Yes | Yes |
| Tilt / movement sensor | Yes | Yes |
| Built-in fume filter / purifier | Yes | Yes |
| Laser shield / filter cover | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB | Wi-Fi |
| Wi-Fi | No | Yes |
| USB | Yes | — |
| Phone app control | Yes | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
