- Processing Talk
- Compare
- H10 10W vs Jinsoku LC-60A 5.5W
Ortur H10 10W vs SainSmart Jinsoku LC-60A 5.5W
What H10 10W does better (2) and where Jinsoku LC-60A 5.5W wins (4) — every spec side by side.
vs
6.2Power & cutting3.8
5.3Speed3.5
7.7Work area9.3
6.2Safety6.9
4.8Features & ease of use4.6
Why is H10 10W better than Jinsoku LC-60A 5.5W?
- Laser output power10 W vs 5.5 W+82%
- Max engraving / travel speed333 mm/s vs 167 mm/s+99%
Why is Jinsoku LC-60A 5.5W better than H10 10W?
- Work area (surface)1,600 cm² vs 3,600 cm²2.2×
- Flame / fire detectionNo · H10 10W: Yes
- Work area width (X)400 mm vs 600 mm+50%
- Work area depth (Y)400 mm vs 600 mm+50%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 450 nm | — |
| Laser power | ||
| Laser output power | 10 W | 5.5 W |
| Work area | ||
| Work area | 400 × 400 mm | 600 × 600 mm |
| Work area width (X) | 400 mm | 600 mm |
| Work area depth (Y) | 400 mm | 600 mm |
| Work area (surface) | 1,600 cm² | 3,600 cm² |
| Max workpiece height | — | 135 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 333 mm/s | 167 mm/s |
| Max cutting depth – wood / plywood (one pass) | 12 mm | — |
| Max cutting depth – acrylic | 8 mm | — |
| Precision | ||
| Laser spot size | 0.08 mm | — |
| Positioning accuracy | 0.01 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Emergency stop button | Yes | Yes |
| Tilt / movement sensor | Yes | — |
| Built-in fume filter / purifier | Yes | — |
| Laser shield / filter cover | Yes | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB | USB |
| Wi-Fi | No | No |
| USB | Yes | Yes |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | — | NC, BMP, JPG, PNG, DXF |
| Size & power | ||
| Weight | — | 6 kg |
