- Processing Talk
- Compare
- 5 Plus 12W vs TTS-10 Pro
NEJE 5 Plus 12W vs Two Trees TTS-10 Pro
What 5 Plus 12W does better (1) and where TTS-10 Pro wins (1) — every spec side by side.
vs
6.4Power & cutting5.7
3.2Safety3.2
3.2Features & ease of use6.4
Why is 5 Plus 12W better than TTS-10 Pro?
- Laser output power12 W vs 10 W+20%
Why is TTS-10 Pro better than 5 Plus 12W?
- Air assistNo · 5 Plus 12W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 12 W | 10 W |
| Work area | ||
| Work area | — | 300 × 300 mm |
| Work area width (X) | — | 300 mm |
| Work area depth (Y) | — | 300 mm |
| Work area (surface) | — | 900 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | — | 500 mm/s |
| Max cutting depth – wood / plywood (one pass) | 10 mm | — |
| Precision | ||
| Laser spot size | — | 0.08 mm |
| Positioning accuracy | — | 0.08 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Water cooling | Yes | — |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Phone app control | Yes | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Weight | — | 3.6 kg |
