- Processing Talk
- Compare
- G6 MOPA 50W vs G6 Split MOPA 60W
Gweike G6 MOPA 50W vs Gweike G6 Split MOPA 60W
What G6 MOPA 50W does better (0) and where G6 Split MOPA 60W wins (1) — every spec side by side.
vs
5.5Power & cutting7.2
4.9Speed4.9
8.4Precision8.4
3.0Work area3.0
4.7Safety4.7
5.6Features & ease of use5.6
Why is G6 MOPA 50W better than G6 Split MOPA 60W?
G6 MOPA 50W has no measurable advantages in this pair.
Why is G6 Split MOPA 60W better than G6 MOPA 50W?
- Laser output power50 W vs 60 W+20%
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| MOPA fibre source (adjustable pulse) | Yes | Yes |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | 50 W | 60 W |
| Work area | ||
| Work area | 110 × 110 mm | 110 × 110 mm |
| Work area width (X) | 110 mm | 110 mm |
| Work area depth (Y) | 110 mm | 110 mm |
| Work area (surface) | 121 cm² | 121 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | 10,000 mm/s |
| Precision | ||
| Positioning accuracy | 0.001 mm | 0.001 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Features | ||
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Compatible software | LightBurn, EZCAD2 | LightBurn, EZCAD2 |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Input voltage | 110–220 V | 110–220 V |
