- Processing Talk
- Compare
- G2 50W vs Split 50W
Gweike G2 50W vs OMTech Split 50W
What G2 50W does better (2) and where Split 50W wins (1) — every spec side by side.
Why is G2 50W better than Split 50W?
- Max engraving / travel speed15,000 mm/s vs 7,000 mm/s2.1×
- Weight6.5 kg vs 35.4 kg5.4×
Why is Split 50W better than G2 50W?
- Autofocus / auto heightNo · G2 50W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | 50 W | 50 W |
| Work area | ||
| Work area | 110 × 110 mm | — |
| Work area width (X) | 110 mm | — |
| Work area depth (Y) | 110 mm | — |
| Work area (surface) | 121 cm² | — |
| Pass-through slot | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 15,000 mm/s | 7,000 mm/s |
| Precision | ||
| Positioning accuracy | 0.001 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Emergency stop button | — | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Water cooling | — | Yes |
| Connectivity & software | ||
| Connections | USB, Bluetooth | USB |
| USB | Yes | Yes |
| Bluetooth | Yes | — |
| Compatible software | LightBurn | EZCAD2 |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Width | 260 mm | — |
| Depth | 440 mm | — |
| Height | 505 mm | — |
| Weight | 6.5 kg | 35.4 kg |
| Rated power consumption | 120 W | — |
| Input voltage | 110–240 V | — |
