- Processing Talk
- Compare
- G2 50W vs G6 Split 30W
Gweike G2 50W vs Gweike G6 Split 30W
What G2 50W does better (1) and where G6 Split 30W wins (1) — every spec side by side.
vs
5.5Power & cutting4.0
8.4Precision8.4
3.0Work area3.0
4.7Safety4.7
2.8Features & ease of use5.6
Why is G2 50W better than G6 Split 30W?
- Laser output power50 W vs 30 W+67%
Why is G6 Split 30W better than G2 50W?
- Autofocus / auto heightNo · G2 50W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | 50 W | 30 W |
| Work area | ||
| Work area | 110 × 110 mm | 110 × 110 mm |
| Work area width (X) | 110 mm | 110 mm |
| Work area depth (Y) | 110 mm | 110 mm |
| Work area (surface) | 121 cm² | 121 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 15,000 mm/s | — |
| Precision | ||
| Positioning accuracy | 0.001 mm | 0.001 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Features | ||
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Bluetooth | — |
| USB | Yes | — |
| Bluetooth | Yes | — |
| Compatible software | LightBurn | LightBurn, EZCAD2 |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 260 mm | — |
| Depth | 440 mm | — |
| Height | 505 mm | — |
| Weight | 6.5 kg | — |
| Rated power consumption | 120 W | — |
| Input voltage | 110–240 V | 110–220 V |
